Serving Atlanta since 1973 |Now hiring technicians

404-351-4331
ARROWHEADLOCK & SAFE INC.

Commercial Doors & Hardware

Commercial Door Hardware Explained: Closers, Exit Devices, Strikes and Hinges

The parts of a commercial door opening, how they work together, common failures, and when to repair or replace door closers and exit devices.

Updated November 17, 2026 · 3 min read · Arrowhead Lock & Safe

A door is a system

Locksmiths call a door, its frame and everything attached to it an opening. Hinges or pivots carry the door, the closer brings it shut, the lock or exit device latches it, the strike receives the latch, and the frame holds it all in line. When one part wears, the others work harder, which is why a single failing closer can lead to a lock that won't latch and a frame that starts to shift.

Door closers

Closers control how a door swings shut. Hydraulic closers have valves for closing speed, latching speed and backcheck. A closer that slams, closes too slowly to latch, or leaks oil needs adjustment or replacement. Leaking closers can't be fixed by adjustment and should be replaced. Size matters too; an undersized closer will never latch a heavy exterior door on a windy day.

Exit devices and panic bars

Exit devices let people leave with one push while the door stays locked from outside. Rim devices mount on the door face, vertical rod devices latch at the top and bottom, and mortise devices are built into the door. Common problems include bars that stick, don't latch or let the door be pulled open, usually caused by worn parts, bent rods or misaligned strikes.

Locks, strikes and hinges

Commercial locks include cylindrical levers, mortise locks and storefront deadbolts, each suited to different doors and traffic. Strikes wear and drift out of alignment as doors sag. Hinges carry the weight of the door; worn or loose hinges let it drop until the latch no longer lines up. Fixing alignment often solves lock problems without new hardware.

Electrified hardware

Access control adds electric strikes, maglocks, electrified levers and electrified exit devices. These need the same mechanical health as any other hardware, plus correct power and wiring. A door that drags or doesn't close fully will cause electronic hardware to fail.

Repair or replace?

Adjust or repair when parts are worn but the hardware is sound and appropriate for the door. Replace when it's damaged, leaking, obsolete, the wrong grade for the traffic, or can't meet code requirements for the opening.

Code, fire doors and accessibility

Commercial door hardware has to meet life-safety and accessibility requirements. Fire-rated doors need to close and latch on their own, so closers and latches on those doors matter for safety, not just security. Exit doors in many occupancies require panic hardware that opens with a single push. Accessible entrances have limits on opening force and closing speed.

When hardware is replaced, it should be suitable for the door's rating and use. A locksmith experienced with commercial openings can help you avoid hardware that fixes a security problem but creates a code problem.

A simple monthly door check

Walk your exterior and high-traffic doors once a month. Open each one and let it close on its own: it should close fully and latch without slamming. Push exit devices to confirm they release smoothly. Look for oil on closers, loose hinges, gaps around the frame and strikes that have shifted. Note any changes and have them looked at before they turn into a door that won't lock at closing time.

Storefront and aluminum doors

Glass storefront doors have their own hardware: narrow-stile locks, pivots instead of hinges, and closers often concealed in the frame or floor. Worn pivots and floor closers cause sagging and dragging, which then wears out the lock. Repairs need parts that fit the door's narrow frame, so tell the locksmith it's a storefront door when you call.

Commercial door repair in Atlanta

Arrowhead repairs and installs commercial door hardware across metro Atlanta, including LCN and Norton closers and Von Duprin and Detex exit devices. Call 404-351-4331 and describe what the door is doing.

Frequently asked questions

Why won't my commercial door latch?

Common causes are a closer that needs adjustment or replacement, a misaligned strike, sagging hinges or a worn latch. Fixing alignment often solves it.

Can a leaking door closer be repaired?

No. A leaking hydraulic closer has lost its fluid seal and should be replaced.

Do you repair panic bars?

Yes. Many exit device problems are fixed with replacement parts and adjustment.

Let's secure what matters

Talk with an Atlanta security professional.