Home & Residential Locks
How Rekeying Works: What Happens Inside the Lock
A plain-language explanation of how a lock is rekeyed: pins, shear line, cylinders and why old keys stop working once a lock is rekeyed.
Updated November 21, 2026 · 3 min read · Arrowhead Lock & Safe
Inside a pin tumbler lock
Most door locks are pin tumbler locks. Inside the cylinder is a plug that turns when the right key is inserted. Small stacks of pins, usually five or six, sit in holes that cross from the plug into the housing around it. Each stack has a bottom pin that touches the key and a top pin pushed down by a spring. When no key is inserted, the top pins cross the gap between plug and housing and stop the plug from turning.
The shear line
When the correct key slides in, each notch lifts its bottom pin to exactly the right height so the gap between the bottom and top pins lines up with the edge of the plug. That edge is called the shear line. With every pin aligned there, nothing blocks the plug, and the key turns. A wrong key lifts at least one pin too high or too low, and the plug stays locked.
What rekeying changes
To rekey, a locksmith removes the cylinder, takes out the plug and replaces the bottom pins with new ones whose lengths match the cuts of a new key. Top pins and springs may be adjusted too. Once the plug goes back in, only the new key lifts the pins to the shear line. The old key, with its different cuts, no longer lines them up, so it stops working.
Why it's fast
For a skilled technician, rekeying a standard residential cylinder takes only a few minutes. The tools are simple: a plug follower to keep the top pins in place while the plug is out, a pinning kit with pins of different lengths, and a key machine to cut the new key. That's why rekeying a whole house can often be done in one short visit.
Keying several locks alike
To make several locks open with one key, each is pinned to the same key cuts. The locks must share a compatible keyway, meaning the key blank fits all of them. When brands differ, a locksmith may swap a cylinder or replace a lock so everything can match.
Master keying
Master keyed locks add small extra pins, called master pins, so two different keys can each create a shear line: the individual key and the master key. Designing that correctly requires a key chart so keys don't accidentally open locks they shouldn't.
When rekeying isn't the answer
If a lock is worn, damaged or low quality, rekeying won't fix it. And rekeying doesn't make a lock harder to pick or force. For those problems, a new deadbolt or a high-security cylinder is the better choice.
Rekeying service
Arrowhead rekeys locks on site and in its shop for Atlanta homes and businesses. Call 404-351-4331.
Frequently asked questions
Does rekeying change the lock's strength?
No. It changes which key works, not how strong the lock is.
Can any lock be rekeyed?
Most standard locks can. Some inexpensive or proprietary locks can't.
How long does rekeying take?
A few minutes per standard cylinder.
Will my old keys still work after rekeying?
No. That's the purpose of rekeying.
Is rekeying the same as changing locks?
No. Rekeying keeps the hardware and changes the key; changing locks replaces the hardware.
More home & residential locks articles
- Residential Locksmith Services in Atlanta: A Homeowner's Guide
- Rekeying vs. Changing Locks: How to Decide
- Changing Locks: When to Do It and Your Options
- Keyless Entry Locks: Keypads, Smart Locks and What to Look For
- The Best Locks for Home Security: What Actually Matters
- Emergency Locksmith Cost: What You Pay For in a Lockout
- What Counts as a Lock Emergency, and What Can Wait
- What Does It Cost to Rekey Locks? The Factors That Matter
- Rekeying Locks to Use the Same Key