Commercial Doors & Hardware
Panic Bar Installation: Choosing and Installing Exit Devices
How panic bars and exit devices are chosen and installed: rim, mortise and vertical rod types, fire-rated hardware, trim and code basics.
Updated November 18, 2026 · 3 min read · Arrowhead Lock & Safe
What panic bars do
A panic bar, also called a push bar or exit device, lets anyone leave a building with a single push, even in a crowd or in the dark. That's why codes require them on exits in many assembly, educational and business occupancies. From the outside, the door can stay locked or be opened with a key, lever or access control, while the inside always allows free exit.
Types of exit devices
Rim exit devices are surface-mounted and latch into a strike on the frame. They're the most common and the simplest to service. Mortise exit devices use a lock body set into the edge of the door for a stronger latch. Vertical rod devices latch at the top and bottom of the door, which is typical on pairs of doors and on doors without a center post. Concealed vertical rod devices hide the rods inside the door for a cleaner look and better tamper resistance.
Narrow-stile devices are designed for aluminum storefront doors with thin frames.
Fire-rated vs. non-rated
Exit devices on fire-rated doors must be fire-rated themselves and can't have mechanical dogging that holds the latch retracted. Non-rated doors can use dogging to leave the door unlatched during business hours. Using the wrong device on a fire door is a common code problem, so check the label on the door edge or frame before choosing hardware.
Outside trim and functions
The outside of an exit door can have no hardware at all, a pull handle, a lever or a key cylinder. Functions decide whether the outside is always locked, unlocked with a key, or controlled electronically. Electrified exit devices can be released by access control, and some include alarms that sound when the door is opened.
What installation involves
The door must be prepared for the device: holes for the mounting, the strike or latches, and any outside trim. Hollow metal doors may need reinforcement. Vertical rod devices need precise alignment at top and bottom. After installation, the device is tested for smooth operation, reliable latching and correct outside function. The closer is checked too, because exit devices only latch if the door closes fully.
Quality matters on busy doors
Exit devices take a beating. Brands like Von Duprin and Detex are built for heavy commercial use and have parts available for years. Cheaper devices often wear out quickly on busy doors and can be hard to repair. For schools, churches and other high-traffic buildings, durable hardware saves money over its life.
Pairs of doors
Double doors are where exit device choices get tricky. With a removable mullion, a post between the doors lets each leaf use a rim device. Without a mullion, vertical rod devices latch top and bottom on one or both leaves, or one leaf is fixed with flush bolts where code allows. Each option has trade-offs for security, maintenance and how wide the opening can be for deliveries. Removable mullions are popular on schools and churches because they combine strong latching with the option to open the full width.
Installation across Atlanta
Arrowhead installs, repairs and services panic bars and exit devices for Atlanta businesses, schools, churches and property managers. Call 404-351-4331 to talk through your doors.
Frequently asked questions
Do all commercial doors need panic bars?
Requirements depend on occupancy type and occupant load. Your fire marshal or code official determines which exits require them.
Can panic bars be locked from the inside?
Exit devices must always allow free exit. They can be locked from the outside, never from the inside.
Can I add a panic bar to my existing door?
Usually, yes, if the door and frame are in good condition and properly prepared.
What's dogging?
A feature that holds the latch retracted so the door can be pushed or pulled open freely. It's not allowed on fire-rated devices.
More commercial doors & hardware articles
- Commercial Door Hardware Explained: Closers, Exit Devices, Strikes and Hinges
- Commercial Door Locks: Types, Grades and How to Choose
- Door Closer Repair: Common Problems and How They're Fixed
- Hydraulic Door Closers: How They Work and Why They Fail
- Door Closer Replacement: What Affects the Cost
- Storefront and Glass Door Closers: Overhead Concealed and Floor Closers
- Panic Bar Repair: Sticking Latches, Broken Bars and Replacement Parts