Commercial Doors & Hardware
Commercial Door Maintenance Checklist for Property Managers
A practical checklist for maintaining commercial doors, locks, closers and exit hardware so they latch, lock and let people out every time.
Updated November 19, 2026 · 3 min read · Arrowhead Lock & Safe
Why door maintenance pays
Doors are used thousands of times a week, and small problems compound. A closer slightly out of adjustment lets the door slam, which loosens hinges, which makes the door sag, which stops the lock from latching. Catching problems early costs far less than emergency repairs and protects security and life safety. A simple routine, done regularly, keeps most doors trouble-free.
The close-and-latch test
Open each door fully and let it go. It should close smoothly, without slamming, and latch on its own. Then push and pull to confirm it's latched. This single test catches most problems with closers, hinges, alignment and latches. Doors that fail it should be scheduled for repair.
Hinges, pivots and alignment
Look at the gap around the door. An uneven gap, scraping at the threshold or rubbing at the top corner means the door has shifted. Check for loose hinge screws and worn hinges. On storefront doors, look for wear at the bottom pivot.
Closers
Look for oil on the closer or the floor, loose arms and brackets, and doors that close too fast or too slowly. Exterior doors may need seasonal adjustment. Replace leaking closers rather than adjusting them harder.
Locks and keys
Keys should turn smoothly. A stiff key often means the door is out of alignment or the cylinder needs service. Make sure deadbolts extend fully. Review who holds keys at least once a year, and rekey when keys are lost or staff leave.
Exit devices
Push the bar on every exit device to confirm it releases easily and the door opens with one motion. Check that dogging works where it's used and that fire-rated devices are not dogged. Look for loose push pads, bent rods and worn bottom latches.
Fire doors
Fire doors must self-close and latch, with no wedges, kick-down stops or holes. Labels must be intact. Fire door assemblies have periodic inspection requirements, so keep records of inspections and repairs.
Thresholds, sweeps and weatherstripping
Check that sweeps and weatherstripping are intact and thresholds are secure. Gaps let in water and pests, and a loose threshold is a trip hazard. These parts are cheap to replace and easy to overlook.
Access control doors
On doors with card readers, confirm that the door relocks after it closes, that exit buttons or sensors release it, and that no door shows as held open. Report problems to whoever manages the system.
Make a schedule
Check high-traffic and exterior doors monthly and interior doors quarterly. Keep a list of every door, its hardware and its issues. Bundle repairs into scheduled visits. Arrowhead helps Atlanta property managers and facilities teams maintain doors and hardware. Call 404-351-4331.
Frequently asked questions
How often should commercial doors be inspected?
Busy and exterior doors monthly; others at least quarterly. Fire doors have their own inspection requirements.
What's the most important check?
Whether the door closes and latches on its own every time.
Can staff do this checklist?
Yes. Staff can spot problems; a technician should make adjustments and repairs.
Should doors be lubricated?
Hinges and some lock parts benefit from appropriate lubricants. Avoid oiling cylinders with products that attract dirt.
Can you set up scheduled maintenance?
Yes. Call to discuss a schedule for your buildings.
More commercial doors & hardware articles
- Commercial Door Hardware Explained: Closers, Exit Devices, Strikes and Hinges
- Commercial Door Locks: Types, Grades and How to Choose
- Door Closer Repair: Common Problems and How They're Fixed
- Hydraulic Door Closers: How They Work and Why They Fail
- Door Closer Replacement: What Affects the Cost
- Storefront and Glass Door Closers: Overhead Concealed and Floor Closers
- Panic Bar Installation: Choosing and Installing Exit Devices
- Panic Bar Repair: Sticking Latches, Broken Bars and Replacement Parts
- Panic Bars with Alarms: Exit Alarm Hardware Explained
- How Much Does a Panic Bar Cost? What Changes the Price
- Panic Bars and Exit Hardware for Gates
- Commercial Door Repair Cost: What You're Paying For
- Storefront Door Repair: Aluminum and Glass Doors
- Commercial Metal Door Repair: Hollow Metal Doors and Frames
- Urgent Commercial Door Repair: What to Do When a Door Won't Lock