Commercial Doors & Hardware
How Much Does a Panic Bar Cost? What Changes the Price
The factors behind panic bar and exit device pricing: device type, fire rating, finish, trim, electrification and the condition of the door.
Updated November 19, 2026 · 3 min read · Arrowhead Lock & Safe
No two exit doors are priced the same
Panic bars range from simple surface-mounted devices for a back door to concealed vertical rod hardware with electric latch retraction on a pair of school entrance doors. The device type, the door it goes on, the outside trim, the finish and the labor to prepare the door all change the total. That's why an accurate price starts with looking at the door, its frame and how it's used.
Device type
Rim devices are usually the most economical and the easiest to maintain. Mortise devices cost more but provide a stronger latch and are common on main entrances. Surface vertical rod devices add top and bottom latches. Concealed vertical rod devices are the most involved to install because the rods run inside the door, and they cost more in parts and labor. Narrow-stile devices for aluminum storefronts have their own price range.
Fire rating and code
Fire-rated exit devices are built and tested to hold fire doors latched and are required on rated openings. They usually cost more than non-rated versions, and they can't use mechanical dogging. Installing a non-rated device on a fire door to save money creates a code violation that can surface at the next fire inspection, so the rating must match the door's label.
Outside trim and functions
A device with no outside hardware is the simplest. Adding a pull, a lever, a key cylinder or a thumb-piece trim adds parts and labor. Cylinders keyed to your building's master key system add a small cost but keep key control consistent. The function you choose, such as always locked, key retracts latch, or lever unlocks with key, also affects the trim required.
Electrified options
Electric latch retraction lets access control or a button unlock the door, and many schools and businesses use it at main entrances. Electrified trim, request-to-exit switches, alarmed devices and delayed egress all add cost, plus wiring and power. These features are worth it where doors need remote control or monitoring, but they aren't necessary on every exit.
Door condition and preparation
A door that's already prepped for the same device is the cheapest to update. Changing device types, filling old holes, reinforcing a hollow metal door, or repairing a sagging door adds labor. Doors that don't close and latch reliably need closer or hinge work too, or the new device won't do its job.
Why quality pays off
Heavy-duty devices from Von Duprin and Detex cost more upfront than economy brands, but on busy doors they last much longer and can be repaired with available parts. Cheap devices often end up replaced within a few years. For schools, churches, warehouses and retail back doors, durable hardware is usually the lower total cost.
Getting a quote
Note whether the door is single or a pair, metal, wood or aluminum storefront, fire-rated or not, and what should happen on the outside. Photos of the door, frame and any label help. Arrowhead quotes, installs and services exit devices across metro Atlanta. Call 404-351-4331.
Frequently asked questions
Are panic bars expensive to maintain?
Quality devices need occasional adjustment and parts. Keeping the door and closer in good shape reduces repairs.
Is a cheaper exit device ever fine?
On low-traffic doors, a lighter-duty commercial device can be reasonable. Avoid consumer-grade hardware on any exit.
Can I reuse my existing outside trim?
Sometimes, if it's compatible with the new device and in good condition.
Does electrified hardware need special power?
Yes. Electric latch retraction and electrified trim need a power supply and wiring, often tied to access control.
How long does installation take?
A like-for-like swap is often quick. New preparation, vertical rods and electrified hardware take longer.
More commercial doors & hardware articles
- Commercial Door Hardware Explained: Closers, Exit Devices, Strikes and Hinges
- Commercial Door Locks: Types, Grades and How to Choose
- Door Closer Repair: Common Problems and How They're Fixed
- Hydraulic Door Closers: How They Work and Why They Fail
- Door Closer Replacement: What Affects the Cost
- Storefront and Glass Door Closers: Overhead Concealed and Floor Closers
- Panic Bar Installation: Choosing and Installing Exit Devices
- Panic Bar Repair: Sticking Latches, Broken Bars and Replacement Parts
- Panic Bars with Alarms: Exit Alarm Hardware Explained
- Panic Bars and Exit Hardware for Gates
- Commercial Door Repair Cost: What You're Paying For
- Storefront Door Repair: Aluminum and Glass Doors
- Commercial Metal Door Repair: Hollow Metal Doors and Frames
- Commercial Door Maintenance Checklist for Property Managers
- Urgent Commercial Door Repair: What to Do When a Door Won't Lock