Serving Atlanta since 1973 |Now hiring technicians

404-351-4331
ARROWHEADLOCK & SAFE INC.

Commercial Doors & Hardware

Commercial Metal Door Repair: Hollow Metal Doors and Frames

Repairing hollow metal commercial doors and frames: sagging, rust, bent frames, hinge failures, lock reinforcement and security upgrades.

Updated November 19, 2026 · 3 min read · Arrowhead Lock & Safe

Where you find hollow metal doors

Hollow metal doors are the steel doors found on back entrances, loading areas, stairwells, mechanical rooms and many fire-rated openings. They're tough, but they take heavy use and abuse: carts bang them, wind slams them, and they're often propped open. Over time their hinges wear, frames bend and hardware loosens.

Sagging and binding

A heavy steel door pulls on its top hinge. When screws strip out of the frame or hinges wear, the door drops and rubs the frame or threshold. Tightening hinges with proper fasteners, replacing worn hinges or upgrading to a continuous hinge fixes most sagging. A door that binds also wears its closer and lock, so fixing alignment protects the rest of the hardware.

Bent frames and damaged doors

Forklifts, carts and forced-entry attempts can bend frames and door edges. Minor damage can often be straightened; severe damage may mean replacing the door or frame. Frames that have pulled away from the wall need their anchors restored so the door can latch securely.

Rust and weather

Exterior steel doors rust from the bottom up, especially where water pools at the threshold. Small rust spots can be treated and painted; rust that has eaten through the bottom of the door or frame usually means replacement. Good drainage, door sweeps and keeping paint intact extend their life.

Locks and reinforcement

Back doors are a common target for break-ins because they're out of sight. A strong commercial lock, a latch guard that covers the gap between door and frame, security hinges or hinge pins that can't be removed, and a reinforced strike make them much harder to defeat. Many businesses add a deadbolt or upgrade to a high-security cylinder on back doors.

Closers and hold-opens

Steel doors are heavy, so closers need to be sized properly. Doors that are routinely propped benefit from hold-open arms or, on fire doors, hold-open devices that release on alarm. Wind chains or overhead stops protect doors that catch the wind.

Fire-rated steel doors

Many steel doors are fire-rated and must stay that way. Repairs and modifications must use rated hardware and methods, and the door must self-close and latch. Holes from removed hardware may need approved fillers. Labels on the door edge and frame identify the rating.

Kick plates and protection

Kick plates, edge guards and door stops protect steel doors from carts and impact. They're inexpensive and extend door life on loading and service entrances.

Metal door repair in Atlanta

Arrowhead repairs hollow metal doors, frames and hardware for warehouses, offices, schools and property managers across metro Atlanta. Call 404-351-4331.

Frequently asked questions

What's a man door?

A common name for a standard personnel door, often a steel door next to an overhead or loading dock door.

Can a rusted steel door be saved?

Surface rust can be treated. Rust through the bottom usually means replacing the door.

How do I secure a back door?

Use a strong lock, a latch guard, security hinges and a reinforced strike, and keep the door closing and latching reliably.

Why does my steel door keep sagging?

Stripped hinge screws or worn hinges. A continuous hinge is a durable fix on busy doors.

Can you add a lock to a steel door?

Yes. Steel doors can be prepared for deadbolts, mortise locks or exit devices.

Let's secure what matters

Talk with an Atlanta security professional.