Commercial Doors & Hardware
Storefront Door Repair: Aluminum and Glass Doors
How aluminum storefront and glass doors are repaired: pivots, closers, narrow-stile locks, exit devices, thresholds and weatherstripping.
Updated November 19, 2026 · 3 min read · Arrowhead Lock & Safe
How storefront doors are built
Storefront doors are aluminum frames with glass panels, hung on pivots at the top and bottom rather than on hinges. They're light, clean-looking and durable, but they rely on a few key parts: pivots, a concealed or floor closer, a narrow-stile lock or exit device and a threshold. When any of those wears, the door starts to sag, drag, swing poorly or fail to lock.
Door drags or sags
A storefront door that scrapes the threshold or rubs the frame usually has a worn bottom pivot, a loose top pivot or a failing floor closer. Weight on the door's corners, people leaning on the door and constant use wear pivots down. Replacing pivots and realigning the door restores smooth swing and protects the closer and lock.
Door won't close or swings too fast
If the door drifts open, slams or won't close fully, the closer needs attention. Overhead concealed closers are adjusted through the header; floor closers through the floor plate. Leaking closers must be replaced. Wind is hard on storefront doors, and a closer with backcheck helps prevent doors from being blown open past their stop.
Lock and key problems
Narrow-stile locks use a hook bolt that swings into the frame. Worn cylinders, bent bolts and misaligned strikes are common. Keys that are hard to turn often mean the door isn't aligned or the cylinder is worn. Cylinders can be rekeyed or replaced, and many storefronts add a second lock or upgrade to a high-security cylinder for better protection.
Exit devices on storefronts
Busy stores and restaurants often need narrow-stile panic bars instead of a key lock. They're designed for the thin aluminum stiles and can be paired with outside pulls, key cylinders or electric access control. Dogging lets the door push and pull freely during business hours where the door isn't fire-rated.
Thresholds and weatherstripping
Worn thresholds, sweeps and weatherstripping let in rain, drafts and pests and make the air conditioning work harder. They're inexpensive to replace and make a noticeable difference, especially on west-facing doors in an Atlanta summer.
Security for storefronts
Glass storefronts are a target for smash-and-grab and forced entry. Strong locks, reinforced strikes, properly latching doors, good lighting and cameras all help. For high-value shops, a restricted-key cylinder prevents unauthorized key copies.
Signs a storefront door needs service
Scraping sounds, a door that has to be pushed shut, keys that stick, oil at the floor plate or daylight showing around the frame all mean it's time for service, before the door stops locking.
Storefront door repair in Atlanta
Arrowhead repairs storefront doors, pivots, closers, locks and exit devices for retailers, restaurants and offices across metro Atlanta. Call 404-351-4331.
Frequently asked questions
Why is my storefront key hard to turn?
The door may be out of alignment, putting pressure on the bolt, or the cylinder may be worn.
Can a storefront door get a panic bar?
Yes. Narrow-stile exit devices are made for aluminum storefront doors.
Can storefront locks be rekeyed?
Yes. The cylinders can be rekeyed or replaced with high-security cylinders.
How do I stop wind from blowing my door open?
A closer with backcheck, proper adjustment and sometimes an overhead stop protect the door.
Do you replace storefront glass?
We repair the door hardware; cracked glass is typically replaced by a glazier.
More commercial doors & hardware articles
- Commercial Door Hardware Explained: Closers, Exit Devices, Strikes and Hinges
- Commercial Door Locks: Types, Grades and How to Choose
- Door Closer Repair: Common Problems and How They're Fixed
- Hydraulic Door Closers: How They Work and Why They Fail
- Door Closer Replacement: What Affects the Cost
- Storefront and Glass Door Closers: Overhead Concealed and Floor Closers
- Panic Bar Installation: Choosing and Installing Exit Devices
- Panic Bar Repair: Sticking Latches, Broken Bars and Replacement Parts
- Panic Bars with Alarms: Exit Alarm Hardware Explained
- How Much Does a Panic Bar Cost? What Changes the Price
- Panic Bars and Exit Hardware for Gates
- Commercial Door Repair Cost: What You're Paying For
- Commercial Metal Door Repair: Hollow Metal Doors and Frames
- Commercial Door Maintenance Checklist for Property Managers
- Urgent Commercial Door Repair: What to Do When a Door Won't Lock