Serving Atlanta since 1973 |Now hiring technicians

404-351-4331
ARROWHEADLOCK & SAFE INC.

Commercial Doors & Hardware

Panic Bars and Exit Hardware for Gates

How to add panic hardware and free-exit latches to metal gates for pools, courtyards, schools and businesses, and what makes gate hardware last.

Updated November 19, 2026 · 3 min read · Arrowhead Lock & Safe

Why gates need exit hardware

Courtyards, pools, playgrounds, dumpster enclosures, parking areas and fenced lots often have gates that must let people out quickly while keeping others from coming in. A panic bar or push-to-exit latch on the inside lets anyone leave with one push, while the outside stays locked or needs a key, code or fob. Codes may require that kind of free egress on gates that are part of an exit path.

Gate hardware is different from door hardware

Gates don't have the frames, stops and closers that doors do, and they're exposed to weather, sprinklers and impact. Standard door exit devices often don't fit gate frames and rust or fail outdoors. Gate-specific panic hardware is designed for tube or square metal frames and outdoor exposure, with mounting kits and lock boxes made for the job. Weather-resistant finishes and stainless parts hold up far better.

Latching and alignment

A gate exit device only works if the gate swings shut and lines up with its keeper or strike every time. Sagging hinges, shifting posts and ground movement all throw gates out of alignment. Gate closers or self-closing hinges bring the gate shut, and a properly aligned strike lets it latch. Fixing the hinge and post problems is often half the job.

Shields and security

Because gates are open framework, someone outside can reach through and push the bar. Mesh panels or shields around the hardware, and lock boxes that cover the latch, stop that. Pool gates in particular often have specific height and latching requirements for child safety, so check local rules when updating pool gate hardware.

Adding keypads, fobs or locks

The outside of a gate can be controlled with a key cylinder, a keypad lock, or an access control reader with an electrified latch or maglock rated for outdoor use. HOA pools and amenity gates commonly use fob readers so access can be managed each season. Any electric hardware still has to allow free exit from inside.

Maintenance

Gate hardware needs more attention than indoor hardware. Lubricate moving parts with products suited to outdoor use, check fasteners, keep closers adjusted, and look for rust. Replace worn latches before they fail completely, since a gate that doesn't latch is effectively open.

Gate closers

Exit hardware on a gate depends on the gate closing by itself. Hydraulic gate closers and spring hinges made for outdoor use pull the gate shut and let it latch. They need adjusting as seasons change, and they're worth checking whenever the gate starts banging or stopping short.

Gate hardware in Atlanta

Arrowhead installs and repairs panic hardware, latches, closers and keypad and fob access on gates for Atlanta HOAs, schools, churches and businesses. Call 404-351-4331 to have your gates looked at.

Frequently asked questions

Can a regular panic bar go on a gate?

Usually not well. Gate-specific exit hardware fits gate frames and stands up to weather.

How do I stop people reaching through to open the gate?

Add a shield or mesh panel around the hardware and use a lock box over the latch.

Do pool gates have special rules?

Many pool gates must self-close and self-latch with latches at certain heights. Check local requirements.

Can a gate have fob access and a panic bar?

Yes. The outside uses a reader and electric release; the inside keeps free exit.

Why won't my gate latch anymore?

Sagging hinges, shifted posts or a worn latch are the usual causes.

Let's secure what matters

Talk with an Atlanta security professional.